-->

160 AutoCAD Commands and Shortcut List, Basic PDF Download

In this massive list of AutoCAD commands, I have tried to include some of the most useful 2D and 3D commands which every AutoCAD user must know.

Is this a massive list of AutoCAD Commands not only commands but also AutoCAD keyboard shortcuts with basic AutoCAD commands PDF is available to download there are some of the most useful commands in Autocad with Keyboard Shortcuts and Tools which every AutoCAD user must know

Guide on how to use commands in AutoCAD with AutoCAD keyboard shortcuts for example press the L (line command) command on your keyboard and enter there is the basic command but below is the massive list of commands more thane 160 commands. examples & a list of AutoCAD commands and commands in AutoCAD.
AutoCAD commands with PDF File eBook included
AutoCAD commands with PDF File eBook included



Work faster and more efficiently by using the AutoCAD shortcuts below. AutoCAD Commands list with PDF format You can find a downloadable list of shortcuts and commands in the AutoCAD Keyboard Shortcuts PDF.

There is another article AutoCAD vs Solidworks

   There are AutoCAD Commands and all AutoCAD commands with PDF File eBook included Download option is available Shortcuts Guide.

Basic AutoCAD Commands

 Basic commands in Autocad like Line command, circle command, rectangle command, are basic commands and are available in pdf of AutoCAD commands.

AutoCAD

    AutoCAD was first released in 1982. It was the first cad software running on personal computers. Before AutoCAD most cad programs were not popular and most of the work was done on a drawing board.
     It is related to software that can improve the designing process related to different fields. Often it is involved in making designs of infrastructure, technology, automobiles, and much more. With the help of AutoCAD, design anything or everything. It is prudent to seek AutoCAD assignment help from experts to get a more immeasurable understanding of the subject.

AutoCAD Commands

 This is the list command AutoCAD of some of the most basic commands in Autocad ( CAD FULL FORM ) which every AutoCAD user should know. These are some of the Draw and Modify commands which make the very basics of AutoCAD and if you are just starting to learn AutoCAD then you should know all of these basic commands. AutoCAD basic commands first you have to do the most important setting Unit, Precision, F7, F9, etc. below settings.   

Autocad commands are the same for all branch 'mechanical engineering Autocad commands' and 'AutoCAD electrical commands, here is the AutoCAD commands with examples



Autocad Commands in pdf

there is a list of AutoCAD commands pdf Download pdf of Autocad commands in one click with AutoCAD keyboard shortcuts.

Commands In AutoCAD

Here is the list of commands in AutoCAD and shortcut keys in AutoCAD start 

AutoCAD Commands – The Essential List

commands in AutoCAD shortcut keys in Autocad command & Description, AutoCAD commands with examples, and pdf of AutoCAD commands, All AutoCAD commands list & list command AutoCAD. Following is the list of Autocad Commands is available in shortcut keys in AutoCAD.

Here is the guide on how to use commands in AutoCAD with AutoCAD keyboard shortcuts for example pres the L (line command) command on your keyboard and enter there is the basic command but below is the massive list of commands more thane 160 commands.

Example type L <> Enter

L <> Enter 

L command It is the command that can be used for making simple lines in the drawing.

C <> Enter 

C command It is the command used for making a circle in AutoCAD.

PL <> Enter 

PL command This command can be used to make a Polyline in your drawing.

REC <> Enter 

REC command This command will make a rectangle in AutoCAD.

POL <> Enter

POL command This command can be used to make a polygon with a minimum of 3 sides and a maximum of 1024 sides.

ARC <> Enter

ARC command As the name suggests, this command can be used to make an arc in AutoCAD.

ELLIPSE <> Enter 

ELLIPSE command As the name suggests, this command can be used to make an ellipse with the major and minor axis

REG <> Enter 

REC command This command can be used to make a region geometry in AutoCAD.

CO <> Enter 

CO command This command is used to copy the object(s) in AutoCAD.

ARRAY <> Enter 

ARRAY command Using this command, you can make a Rectangular, polar, or Path array.

TR <> Enter 

TR command This command is used for trimming geometry.

OP <> Enter 

OP command Using this command, you can open the options window which contains most of the settings of AutoCAD.

SC <> Enter 

SC command This command is used to change the scale of an object. 

B <> Enter

B command This command is used for creating a block, the properties of the block can be defined using the block definition window.

I <> Enter 

I command This command can be used to insert an existing block or a drawing as a block in AutoCAD. 

ST <> Enter 

ST command Using this command, you can open a text style window that controls the properties of the default AutoCAD text style.

X <> Enter

X command This command can be used to explode objects like Polyline to simple lines, an array or a block to simple geometry, etc.

F <> Enter 

F command This command can be used to add rounded corners to the sharp edges of the geometry, these round corners are also called fillets.

CHA <> Enter 

CHA command This command can be used to add slant edges to the sharp corners, these slant edges are also called chamfers.

LA <> Enter 

LA command This command can be used to open layer properties manage palette which is a tool for creating and managing layers in a drawing.

Autocad commands in PDF

there is a pdf of AutoCAD commands and commands in AutoCAD
Autocad Commands in pdf
AutoCAD Commands - AutoCAD commands in PDF - AutoCAD basics Commands PDF downloads AutoCAD PDF 

 

Status Bar Toggle 

The status bar is an important feature of the AutoCAD user interface and its tools are required quite frequently while making or editing your drawing hence they are available on the status bar for easy access. You can activate or deactivate status bar icons using keyboard shortcuts, commands in AutoCAD, or by clicking on their respective icon. In this section, I have listed the most frequently used status bar options along with their properties and uses.  AutoCAD command list, AutoCAD commands 3D, Autocad command and their uses PDF, AutoCAD commands 3D PDF, AutoCAD commands with examples & list command AutoCAD

shortcut keys in pdf of AutoCAD commands and Autocad command with examples

F7

F7 command This status bar tool will toggle the visibility of the background grid which is often visible in your drawing area.

F9 

F9 command Toggle Snap mode, when the snap mode is active AutoCAD cursor will jump to specific points in the drawing area which is defined in snap mode.

F8

F8 command Toggles Ortho mode on/off. When ortho mode is on you can make lines either horizontally or vertically only.

F10

F10 command Toggles Polar tracking on/off. With polar tracking active you can make lines inclined to any angle which is defined in the polar tracking increment angle.

F11

F11 command Toggles Object snap tracking on/off. Using this option, you can track snap points of geometries like center, midpoint, endpoint, etc., and make geometries with their reference.

F3

F3 command One of the most important status bar toggles. This function key activates/deactivates the object snap option, when object snap is active you will be able to snap your cursor to some exact points in the geometry like End, center, quadrant, tangent, etc. This option allows you to make precise AutoCAD drawings.

DYNMODE

DYNMODE Command By default, the value of this system variable is set to -3 which keeps it off you change this system variable to 3 to make dynamic input active. Dynamic input allows you to add information dynamically on the cursor tooltip.

ISODRAFT

ISODRAFT Command Using this toggle you can activate the isometric drawing plane in AutoCAD. You can select from Isoplane Left, Isoplane Top, and Isoplane Right. You can also toggle between different isoplanes using the F5 function key. The default value of ISODRAFT option is orthographic.

More about making an isometric drawing using this tool here: How to make isometric drawing in AutoCAD

LWDISPLAY

LWDISPLAY Command This system variable toggles the visibility of line weight in a drawing. The default value of this system variable is OFF which keeps the line weight display off you can change its value to ON to keep line weight visible in the drawing area.

TRANSPARENCYDISPLAY

TRANSPARENCYDISPLAY Command Just like line weight this status variable allows you to toggle the visibility of transparency of an object. You change the value of this system variable to 1 to make transparency visible or 0 if you want to make it invisible.

SELECTIONCYCLING

SELECTIONCYCLING Command Using this system variable you can select overlapping objects very easily. When the value of this system variable is set to 2, an overlapping icon and a menu containing a list of overlapping objects appear and you can select the required object from this list.

If you set the value of this system variable to 1, only the overlap icon appears not the menu. You can turn this off by changing the value of this system variable to 0.

GRAPHICSCONFIG

GRAPHICSCONFIG Command Using this status bar option you can open the Graphics configuration window which is used to change settings related to the display and graphics properties of AutoCAD. You can also use 3DCONFIG for opening the graphics performance window.

About Catia 

Keyboard Shortcut Keys - AutoCAD shortcuts keys

AutoCAD shortcuts key and AutoCAD commands with exampleslist command AutoCAD

Ctrl + N  

Ctrl + N command you can use this shortcut to open a new drawing tab in AutoCAD.

Ctrl + S 

Ctrl + S command You can use this keyboard shortcut to save a drawing file.

Ctrl + Shift + S 

Ctrl + Shift + S command you can use this keyboard shortcut to save the drawing as a new file or in short, this is a shortcut for the “save as” command

Ctrl + 0

Ctrl + 0 command clears the screen to show only the drawing area and hides palettes and tabs. Press it again to reset the default AutoCAD interface.

Ctrl + 1 

Ctrl + 1 command Select an object and press Ctrl + 1 to open the properties palette which lists the properties of the object. You can use this palette to modify most of the properties of the object too. You can also use the PR command to open the property palette.

Ctrl + 2  

Ctrl + 2 command You can use it to open the design center palette which contains many AutoCAD blocks that can be used directly in your drawing.

Ctrl + 9 

Ctrl + 9 command You can use this keyboard shortcut to toggle the visibility of the command line. If for some reason your command line is hidden from the drawing area, then use this keyboard shortcut to bring it back.

Ctrl + C 

Ctrl + C command Select objects from the drawing area and press Ctrl + C to copy objects to the clipboard.

Ctrl + V  

Ctrl + V command To paste the copied objects of the clipboard in the drawing keeping their original properties, you can use this keyboard shortcut.

Ctrl + Shift + V

Ctrl + Shift + V command To paste the copied objects as a block you can use this keyboard shortcut, the block thus created will have a random set of characters as names. You can use this keyboard shortcut to make blocks quickly without going through the creative block window.

Ctrl + Z  

Ctrl + Z command This keyboard shortcut can be used to undo the last action in your drawing. You can press this shortcut key multiple times to undo many actions.

Ctrl + Y

Ctrl + Y command This keyboard shortcut can be used to redo the last undo action which you have performed.

Ctrl + Tab 

Ctrl + Tab command You can use this keyboard shortcut to cycle through all open drawing tabs in AutoCAD.

General Commands

list command AutoCAD

BCOUNT <> Enter

BCOUNT command This command is useful for counting the number of blocks in your drawing. It reports the number of each instance of block used in the drawing along with its name. To count the block, it should be visible in the drawing area.

TXTEXP <> Enter

TXTEXP command Using this command, you can convert single line as well as multiline text into geometries.

XLINE (XL) <> Enter

XLINE command Using this command, you can make infinite lines starting from the point of selection. When you
trim or break this infinite line to a finite length it becomes a simple line geometry.

POINT (PO) <> Enter

POINT (PO) command This command makes a single-point geometry in the drawing. To modify the type of point created by this command you can use the PTYPE command and choose the desired point type from the Point Style window.

REVCLOUD <> Enter

REVCLOUD command Using this command, you can make a revision cloud geometry by freehand sketching.

SKETCH <> Enter

SKETCH command You can make a freehand sketch using this command. You can use Line, Polyline, or Spline as the object type for making this freehand sketch.

MULTIPLE <> Enter

MULTIPLE command If you want to repeat any command without pressing enter key then uses the MULTIPLE commands. To cancel the repetition of the command, press the ESC key.

NCOPY <> Enter

NCOPY command Use this command to copy nested objects from a block or Xref without exploding them. ‘

CAL <> Enter

CAL command Using this subcommand, you can perform calculations directly on the AutoCAD command line even when you are in the middle of a command. You can start this subcommand by entering CAL (don’t forget to add an apostrophe before CAL) while running any other command.

BURST <> Enter

BURST command Explodes the block containing attributes retaining the attribute setting and its layer definition. This is especially helpful if you want to retain the text of the attribute after exploding the block.

SP <> Enter

SP command Using this command, you can check the spelling of selected text and correct the spellings from Check the Spelling window.

ARCTEXT <> Enter

ARCTEXT command This command can be used to write arc-aligned text in AutoCAD. You can use this command to even write text aligned to a circle. More about this command can be found in this related article.

OOPS <> Enter

OOPS command This command can be used to restore the last deleted object in your drawing. After deleting an object if you made many other changes in the drawing and realized that you might need to restore the deleted object then simply type OOPS and press enter.

CHSPACE <> Enter

CHSPACE command This command can be used to change the space of an object from model space to paper space and vice versa. See the animated image shown below for reference.

DIVIDE <> Enter

DIVIDE command You can use this command to divide any 2D geometry into many equal parts. At each point of division, a point geometry will be added to the 2D curve. More about this command can be found in this related article.

RENAME <> Enter

RENAME command If you need to rename any named object like layer, block or line type simply use this command to rename it. More about this command can be found in this related article.

BREAK <> Enter

BREAK command This command can be used to break 2D geometries at one or two points. It is helpful if you want to break a curve at the point of intersection with an additional curve or if you want to create a gap by breaking a part of the geometry.

TIME <> Enter

TIME command Using this command, you can find a lot of information about your drawing like the date when the drawing was created and the total editing time consumed on the drawing.

QSELECT <> Enter

QSELECT command This command can be used to make the selection from your drawing with filters. For example, you can use quick selection to make a selection set containing all circles of the drawing with the radius of a particular value.

DI <> Enter

DI command It can be used to find the distance between two points in the drawing.

COPYBASE <> Enter

COPYBASE command Using this command, you can copy any object using a base point.

PASTECLIP <> Enter

PASTECLIP command You can paste the copied objects from the clipboard to your drawing using this command. If you use COPYBASE to copy the objects then you will be able to paste them in the same or another drawing with the selected base point.

LIST <> Enter

LIST command Using this command, you can find lots of properties of an object like the layer they are on, area, length or radius, perimeter or circumference, and a lot more. To use this command simply type LIST on the command line then press enter and select the object from the drawing area about which you want to know and press enter again.

DIM <> Enter

DIM command This command was introduced in AutoCAD 2016 version and it can be used to make most of the dimensions like Linear, aligned, radius, diameter, and baseline. To access this command, you can use the DIM command or select the DIM tool from the dimensions panel of Annotate tab.

TOLERANCE <> Enter

TOLERANCE command If you want to add a feature control frame representing tolerance-related information in your drawing then you can use this command.

SCALETEXT <> Enter

SCALETEXT command Using this command, you can change the scale of the existing Text or M text object in the drawing. To use this command type SCALETEXT on the command line press enter and select the text from the drawing area and press Enter again. Now select the “Existing” option from the command line and then select the “scale factor” option and then type the scale in which you want to convert the text height and press enter. When the scale of these text entities is changed the base point will remain fixed.

BASE <> Enter

BASE command Using this command, you can change the base point of a drawing without changing its origin. This is especially helpful in the situation where you want to insert the drawing into another as an Xref. By default, AutoCAD takes origin as the base point which can be modified using this command without changing the origin.

DWGPREFIX <> Enter

DWGPREFIX command If you have a drawing open in AutoCAD and you don’t know the location where it is saved you can simply type the DWGPREFIX command to look it. This command can be used to quickly find the location of Xref’s attached in the drawing.

TJUST <> Enter

TJUST command Using this command, you can change the text justification of Text and Mtext elements in the drawing.

UNITS <> Enter

UNITS command Using this command, you can set the drawing units and other settings like the precision of linear and angular dimensions and default rotation angle.

ML <> Enter

ML command Using this command, you can make a multiline geometry that contains multiple parallel lines.

TINSERT <> Enter

TINSERT command You can insert a block or a drawing as a block in the table using this command. You can also fit the block in the table cell and also justify its location automatically with the INSERT dialogue box. I have made a simple table by importing blocks of the design center as shown in the image below.

MIRRTEXT <> Enter

MIRRTEXT command By default, AutoCAD does not mirror text in the drawing but if you want to mirror the text of your drawing then change the value of the MIRRTEXT system variable to 1.

AREA <> Enter

AREA command As the name suggests this command can be used to find the area of closed or open shapes in the AutoCAD drawing. To know more about finding the area in AutoCAD drawings refer to this related article.

TORIENT <> Enter

TORIENT command Using this command, you can reorient text entities in the best readable position. In image A below the text is oriented at different angles and in some of the situations, the text is not properly readable. Whereas in image B below TORIENT command has been used to make the text readable for all angles.

ID <> Enter

ID command This command can be used to find the coordinate values of a point in AutoCAD drawing.

MINSERT <> Enter

MINSERT command Using this command, you can insert existing blocks of a drawing as a rectangular array component. An array added using MINSERT command can’t be exploded.

BOUNDARY <> Enter

BOUNDARY command Using this command, you can extract closed boundaries from any enclosed area. This boundary can be used to find the area of the enclosed region or for many other applications. In the image below the boundary of the area mentioned as A has been extracted as a polyline using the BOUNDARY command.

DIMROTATED <> Enter

DIMROTATED command This command can be used to make a dimension line inclined to a particular angle with respect to the positive side of the X-axis. In the example shown below the dimensions are made with the DIMROTATED command.

BREAKLINE <> Enter

BREAKLINE command You can use this tool to make a Breakline symbol on a line. Type BREAKLINE on the command line and press enter then click on the scale option of the command line and apply an appropriate scale to the breakline. Select the starting and endpoints of the breakline then click at any point on the line to specify the location of breakline or directly press enter to place it exactly at the center of the line.

TXT2MTXT <> Enter

TXT2MTXT command Using this command, you can convert a text object into a Mtext object and you can also combine multiple separate Mtext objects into a single Mtext unit.

SAVEALL <> Enter

SAVE ALL command As the name suggests this command can be used to save all of the open drawings in the AutoCAD window.

Performance Increasing Commands

list command AutoCAD

CLOSEALL <> Enter

CLOSE ALL Command If you have multiple tabs open in your AutoCAD window and you don’t want to manually close them one by one then you can simply use the CLOSEALL command to close all the open windows. AutoCAD will prompt you with the save dialogue box before closing all unsaved drawings and it will take you to the start screen after closing all of the drawings.

FILEDIA <> Enter

FILE DIA Command This system variable suppresses the dialog box that opens up when invoking certain commands like Save, Save As, and Export. The default value of this system variable is 1 which allows the dialog box to open. When you, however, change the value of this system variable to 0 the command will run on the command line and the dialog box will not open.

AUDIT <> Enter

AUDIT Command This command should be used for removing errors from your drawing. It is always a good practice to keep checking your drawing file with the AUDIT tool for errors.

RECOVER <> Enter

RECOVER Command This command is similar to the AUDIT command but it is useful for the drawings which are corrupted to such an extent that you can’t even open them. More about drawing repair tools can be found in this related article.

MA <> Enter

MA Command This command is a great time saver if you want to copy properties of one object on other without changing its geometry or contents.

CLOSEALLOTHER <> Enter

CLOSEALLOTHER Command Using this command you can close all open drawing windows except the current drawing window.

TEXTFIT <> Enter

TEXT FIT Command Using this command you can shrink or expand the text entities in a drawing to fit in the required area. In the example below I have fitted the AutoCAD text within the rectangle using the TEXTFIT command.

WIPEOUT <> Enter

WIPEOUT Command Using the wipeout command you can clean the background in a crowded drawing to make overlaying objects clear against the background. In the image shown below Wipeout command has been used to clean the area around the second hook. You can use the WIPEOUTFRAME system variable and change its value to 0 to remove the wipeout frame boundary also.

DWGUNITS <> Enter

DWGUNITS Command Using this command you can convert your AutoCAD drawing from one unit to another and you can also scale the existing drawing to new scales automatically, you can know more about this command in the related article.

TEXTMASK <> Enter

TEXTMASK Command Using this command you can automatically create masking behind the text to make it clearly visible against the crowded background. In the image below Textmask has not been applied for the first case and in the second case, it has been applied.

LAYMRG <> Enter

LAYMRG Command If you want to merge layers of multiple objects then this command is for you. THE type LAYMRG press enters the key and then selects the objects whose layers you want to change then press enter again. Select any object of the target layer on which you want to transfer the selected objects and press enter again.

All the objects of the selected layer will be transferred to the end layer and also the selected layer will be removed.

DS <> Enter

DS Command Using this command you can open the drafting settings window which can be used to change settings related to status bar options like object snap, polar tracking, snap, and grid settings.

LAYWALK <> Enter

LAYWALK Command Using this command you can check all the objects which are on a particular layer. When you use LAYWALK command a list with all layers appears on the screen and you can click on any of the layer(s) from the list and objects from that layer(s) will only become visible in the drawing area. The original status of layer and object visibility is restored once you close the LAYWALK window.

CENTERMARK <> Enter

CENTER MARK Command This tool was added in the AutoCAD 2017 version and it allows you to create center marks easily on a circle or arc.

CENTERLINE <> Enter

CENTERLINE Command As the name suggests you can add a centerline easily between parallel or intersecting lines using this tool. See the related article for more on Centermark and Centerline tools.

TABLET <> Enter

TABLET Command If for some reason you are looking to use Tablet as a pointing and navigation device in AutoCAD then you can use this command to turn the Tablet input on and off. The Tablet can be turned on and off using the TABMODE system variable also.

PURGE <> Enter

PURGE Command This command can be used to remove unused named objects like layers, blocks, and dimension styles from the drawing.

LAYDEL <> Enter

LAYDEL Command Using this command you can delete some of the most stubborn layers from your drawing which can’t be removed using the PURGE command. This command can also remove the Defpoints layer and also layer containing objects but I would not recommend that.

FILLMODE <> Enter

FILL MODE Command Using this system variable you can turn off or on the visibility of filled area in hatches or wide polylines by changing its value to 0 or 1 respectively. By turning the FILL MODE off you can enhance the performance of AutoCAD by limiting resources consumed on regenerating the filled geometries.

You need to regenerate the drawing using the REA command after changing this system variable to see its effect on the drawing.

APERTURE <> Enter

APERTURE Command his system variable controls the area of influence of object snap. The aperture size as defined by this system variable is the area of the square under which the point will be selected if the cursor is brought into it. The default value of this aperture is 10 but depending on the complexity of the drawing you can change this value between 1-50.

The size of the aperture is relative to the current scale of the screen and it is not an absolute value. In the image below the red box (not visible in AutoCAD) is the aperture size for two values 10 and 50 respectively.

OVERKILL <> Enter

OVERKILL Command Use this command to remove overlapping or unnecessary geometries from the drawing.

ISAVEPERCENT <> Enter

ISAVEPERCENT Command You can change the value of this system variable to reduce the time it takes to save a drawing. This system variable also affects the file size of AutoCAD drawings and its compatibility with other software.

By decreasing the value of this system variable you can increase its compatibility with other software and it also decreases the size of the CAD file but the time consumed in save operation generally increases. When you increase the value of this system variable opposite happens.

The default value of this system variable is 50 and it can be changed from 0 to 100.

SELECTIONPREVIEW <> Enter

SELECTIONPREVIEW Command When hovering the cursor over any object a preview will appear if the value of this system variable is set to 3. You can remove this preview thereby improve the performance by changing the value of this system variable to 0.

HIGHLIGHT <> Enter

HIGHLIGHT Command This system variable is also similar to SELECTIONPREVIEW but in this case, the object will appear highlighted when selected. Its default value is 1 but you can turn off this highlighting effect by changing its value to 0.

RECOVERALL <> Enter

RECOVER ALL Command This command repairs a corrupted or damaged drawing along with all of its attached Xref’s.

LAYMCH <> Enter

LAYMCH Command Using this command you can change the layers of selected objects. To use this command type LAYMCH on the command line and press enter key then select objects whose layer assignment you want to change and press enter then select any object of the layer which you want to apply on selected objects and press enter key again.

PICKBOX <> Enter

PICK BOX Command Using this system variable you can change the size of the Pick box which appears at the cursor of AutoCAD. The default value of this system variable is 3 and you can change its value from 0 to 50.

In the image below the size of the Pick box is 3 for the first cursor and 10 for the second cursor.

STARTMODE <> Enter

START MODE Command This system variable will toggle the visibility of the start tab at the beginning of the AutoCAD application. By default the value of this system variable is 1 which allows the start screen to appear, you can change this value to 0 if you don’t want to see the start screen.


AutoCAD 3D Commands

list command autocad
This section in AutoCAD 3D commands related to solid, surface, and mesh modeling. You might be familiar with many of these commands but there are also many commands which are not frequently used despite their great features.

THICKEN <> Enter

THICKEN Command Using this command you can convert a surface into a 3D solid by adding thickness to it.

CONVTOSOLID <> Enter

CONVTOSOLID Command Using this command you can convert 3D mesh and watertight objects made with surfaces to 3D solid and you can also control whether the converted solid is smooth or faceted.

POLYSOLID <> Enter

POLYSOLID Command Using this command you can make a 3D wall-like shape as shown in the image here, you can also define the height and thickness of this poly solid using command-line options.

DELOBJ <> Enter

DELOBJ Command This system variable controls the behavior or 2D curves when 3D tools like Extrude, Presspull, and Sweep are used. You can change the value of this system variable so that AutoCAD either retains or deletes curves after converting them to 3D.

VOLUME <> Enter

VOLUME Command Using this command you can find the volume of a 3D solid as well as lots of other information like its moment of inertia, the radius of gyration, centroid, and products of inertia.

XEDGES <> Enter

XEDGES Command You can extract edges of a 3D solid as 2D geometries using this tool. In the image shown here, the XEDGES tool has been used to extract the edges of the 3D solid and then the solid geometry has been moved to reveal the edges only.

REGEN3 <> Enter

REGEN3 Command This command was introduced in AutoCAD 2017.1 update and it is especially helpful in removing the 3D graphics-related anomalies and surface tessellations.

SECTIONPLANE <> Enter

SECTION PLANE Command Using this command you can create a section plane in the drawing that can be used to see the 3D drawings by sectioning them along different planes.

FLATSHOT <> Enter

FLATSHOT Command This command is great for converting a 3D drawing into 2D and using this command you can also create multiple views of a single 3D drawing like the front, top and isometric on a single plane. To know more about this command follow the related article.

INTERFERE <> Enter

INTERFERE Command This command can be used to detect intersecting 3D solids. The command is especially useful in situations where you want to detect clashes between different solids like pipes and walls.

PROJECTGEOMETRY <> Enter

PROJECTGEOMETRY Command Using this command you can project a 2D curve on a 3D surface, solid, or region as shown in the animated image below.

Shell (SOLIDEDIT) <> Enter

Shell Command Using this command you can convert a 3D solid into a hollow solid with a wall thickness. To use this command type SOLIDEDIT on the command line press enter type B press enter again type S and press enten. Alternatively, you can also select the shell tool from the Solid editing panel of the Solid tab.

SURFPATCH <> Enter

SURFPATCH Command Using this command you can fill the open areas of a surface like the top of a cylinder as shown in the animated image below.

HELIX <> Enter

HELIX Command As the name suggests this command can be used to make a helix in AutoCAD drawing.

Moveface (SOLIDEDIT) <> Enter

Moveface Command Using this tool you can move faces like a groove of a 3D solid from one point to other as shown in the animated image below. For using this tool type SOLIDEDIT on the command line press enter then type F press enter then type M and press enter again.

SURFTRIM <> Enter

SURFTRIM Command This command is similar to the trim command of 2D drawings but in this case, it will trim surfaces instead of 2D geometries.

3DALIGN <> Enter

3DALIGN Command Using this command you can align a 3D solid object with respect to another 3D solid, this video explains the use of this command in detail.

SURFOFFSET <> Enter

SURFOFFSET Command Using this command you can offset any surface inside, outside, or on both sides of the surface as shown in the animated image below.

SOLIDHIST <> Enter

SOLIDHIST Command Using this tool you can record the history of solids on which boolean operations are performed and you can modify these solids later.

In the image below Subtract operation is performed on two solids and then the amount of removed part is changed by selecting the Cone by pressing CTRL key then changing its base radius.
 
By default, the value of this system variable is 0 which keeps this feature off but you can turn it on by changing its value to 1.

IMPRINT <> Enter

IMPRINT Command Using this command you can imprint 2D drawings on planar faces of a 3D solid or a surface to create additional faces for 3D tools like Presspull.

Did we miss any command or tool which should be included in this list? Let us know in the comments below.

Accessibility Commands


These commands will help you make your overall drawing workflow faster and efficient by eliminating the need for many repetitive tasks. It is always a great practice to use as few steps as possible to keep the drawing workflow easy and avoid unnecessary data in your drawing, and the commands of this section will help you achieve just that.

list command AutoCAD

TEXTSCR <> Enter

TEXTSCR Command This command will open a text window that has a history of recently used commands.

BATTMAN <> Enter

BATTMAN Command This tool can be used to modify the attribute information of blocks containing attributes.

3DCONFIG <> Enter

3DCONFIG Command You can use this command to Turn on/off hardware acceleration or change the graphics-related properties of AutoCAD like smooth line display and high-quality graphics display.

SEEK <> Enter

SEEK command This command will redirect you to the page It is one of the great places to get blocks for your projects.

FS <> Enter

FS Command Using this command you can select objects which are connected to the selected object in the drawing area. The behavior of this command is controlled by the FSMODE system variable, if the value of FSMODE is OFF then the FS command will select only the selected object and one object that is directly connected to the selected object.

If the value of FSMODE is ON then the FS command will select the selected object as well as all the objects connected to it and its next connected object in the series. This selection series continues as long as the command finds connected objects.

TEXTTOFRONT <> Enter

TEXTTOFRONT Command Using this command you can bring TEXT, Dimensions, and Leader lines on the front of all underlying objects like hatches. This command is especially helpful if you want to bring multiple annotations to the front of all drawings objects without changing their draw order selectively.

PUBLISH <> Enter

PUBLISH Command Using this command you can print multi-sheet files directly, unlike the PLOT command which only plots a single sheet this command will allow you to plot multiple sheets or even all of the sheets of the drawing directly.

ISOLATE <> Enter

ISOLATE Command Using this command you can hide all objects from the drawing area except the selected objects. By hiding unnecessary objects from drawing you can get a clean work area. To bring all the hidden objects back to the drawing select UNISOLATE or UNHIDE command.

HIDEOBJECTS <> Enter

HIDEOBJECTS Command This command is similar to the ISOLATE command but in this case, you can hide selected objects keeping the remaining objects visible. In this case, also you can bring back hidden objects by using UNHIDE or UNISOLATE command.

GROUP <> Enter

GROUP Command Using this command you can group multiple objects as a single unit. This command is great for making groupings of similar types of objects like a group of similar blocks. To break this group you can use UNGROUP command.

ADCENTER <> Enter

ADCENTER Command This command can be used to bring the Design Center palette to the drawing area. You can also use the CTRL+2 key to open the design center palette. To know more about the design center go to the related article.

IMPORT <> Enter

IMPORT Command Using this command you can import drawings of many different formats in AutoCAD, the list of all supported formats is shown in the image below.

FIELD <> Enter

FIELD Command Fields are dynamic text information that can add a lot of intelligence to your drawing by keeping data interlinked and updated. Fields are extensively used in the sheet set and layout drawings and they can be used to automate a lot of information in AutoCAD drawings.

You can start the Field window using the FIELD command of AutoCAD.

WBLOCK <> Enter

WBLOCK Command If you want to export a certain part of your drawing or any of its blocks to an external file then you can use the write block tool or its command equivalent WBLOCK.

pdf of Autocad commands


AutoCAD Commands list shortcut keys basic PDF download - Learncade
150 AutoCAD Command and Shortcut list, PDF eBook included





close